• Tel:0577-57883698
  • Fax:0577-57883178
Send Message

Plane and angle of the tool tip

From:Net   Date:2012-3-2

果博东方登录 www.zmeiko.com  

Plane and angle of the tool tip

Machine tools are used for the manufacture of cutting tools, also known as cutting tools. As used in the manufacture of the tool machine are basically used for cutting metal materials, and the "tool" is generally understood to metal cutting tools.

Tool Plane

---- By the cutting edge cutting plane of the cutting edge tangent to the selected point and perpendicular to the plane of the base plane.
The main cutting plane Ps ---- selected point by the cutting edge and the main cutting edge and perpendicular to the tangent plane of the base plane. It cut the transition surface, which means that it is composed of the cutting speed and the cutting edge tangent plane.
---- By the sub cutting edge cutting plane with the selected point and the secondary cutting edge tangent to a plane perpendicular to the base plane.
Pt ---- base selected point by the cutting edge perpendicular to the direction of the synthetic cutting plane. Stationary reference system in the tool, the cutting edge which is selected points over a plane parallel or perpendicular to the tool in the manufacturing, grinding and measurement of positioning for the installation or a plane or axis perpendicular to its orientation in general the main direction of movement is assumed.
Assuming that the work plane ---- stationary reference system in the tool, which is over the selected point and the cutting edge perpendicular to the base plane, parallel or perpendicular to the tool in the manufacture, sharpening, and the measurement for the installation or positioning a flat or axis, generally assumed to be parallel to the orientation of the main direction of movement.
Normal plane Pn ---- selected point by the cutting edge and a plane perpendicular to the cutting edge.

Angle of the tool tip

1 main angle cutting edge and the feed angle between the direction of motion see.
(1) Deputy Vice cutting edge angle and feed motion angle between the opposite direction.
3 blade cutting edge inclination angle between the base surface.
4 rake angle of the rake face and the angle between the base surface.
5 After the flank angle of the angle between the cutting plane.
6 The Deputy Vice planing surface in the posterior horn, the deputy vice flank with the angle between the cutting plane.

 

E-mial:china@www.zmeiko.com Tel:0577-57883698  Fax:0577-57883178
Address:Xiangyang Road 35#, Yongjia County, Zhejiang, China    Postcode:325105